Huzhou Xiasen Import and Export Co., Ltd. is one of the leading manufacturers and suppliers of modern leather executive chair in China. We are committed to providing high quality furniture with competitive price. Welcome to buy high-end modern leather executive chair for sale here from our factory. Also, pricelist is available.
Modern Leather Executive Chair · Walnut Shell · Aluminium Base · Delivered Assembled · Xiasen
Most executive chairs are sold on how they look in a photograph. This one is easier to sell on what happens when it arrives - it comes out of the box finished. No Allen key, no eight-step instruction sheet, no customer calling your support line because a gas lift will not seat into the base.
The Modern Leather Executive Chair is built around a heat-pressed bentwood shell finished in walnut veneer, wrapped in leather, and carried on a polished aluminium five-star base. The shell curves up into the armrests in one continuous form, so there are no arm brackets bolted to the outside and no visible fasteners on the profile. That single design decision is what separates it from the boxy executive chairs in the same price band, and it is also why the chair reads as furniture rather than as office equipment.

Products Structure
1. The shell is one piece, and that is the whole design
The back and arms are a single heat-pressed bentwood form. Most chairs at this level bolt aluminium or steel armrests onto a separate backrest, and those joints are where movement develops - a millimetre of play at the bracket becomes a creak, then a wobble, then a review complaint.
A continuous shell has no bracket. The armrest is the same piece of material as the back, which is why the silhouette is clean and why the chair does not develop the loose-arm rattle that shows up around year two.


2. Walnut veneer over bentwood, not solid walnut
The shell is a heat-pressed multi-layer bentwood core with a walnut veneer face. That is the correct construction for a curved shell of this thickness - a solid walnut panel bent to this radius would either spring back or crack along the grain within a season. The veneer is what gives the grain and the warmth.
3. Gas lift and base plate: the two parts you should not compromise
The cylinder is an alloy explosion-proof unit with an 80 mm stroke, sitting on a steel base plate under the seat. The plate is the part nobody photographs and everybody relies on: it is what keeps the cylinder from punching through the seat pan under a sudden load.
We supply the gas lift class your market requires and can provide the test report with the shipment.


4. 135° recline with a lock you can actually use
The backrest releases to 135° and locks at intermediate positions via the bar under the seat; a rotary knob sets the recline tension. Two separate controls, which is the right way round - tension is a preference, angle is a task. Users set the tension once and change the angle many times a day.
5. PU twin-wheel casters, and why floor type matters
The casters are PU twin-wheel, chosen for quiet running and for not marking hard floors.
- On tile, marble and polished concrete - the standard floor in Gulf and Mediterranean offices - PU is the correct compound.
- On thick carpet it rolls heavier, and on very soft carpet a larger wheel diameter is better.
Tell us the floor and we will specify the wheel rather than ship the default.

The Three Leather Grades, and Which Market Wants Which
| PU | Microfiber | Genuine leather | |
|---|---|---|---|
| Surface | Smooth, uniform, slight sheen | Soft, matte, suede-like hand feel | Visible pores, natural grain variation |
| Durability | Good abrasion resistance; sensitive to hydrolysis | High - stable in heat and humidity | High, but needs conditioning |
| Hot & humid climates | Risk - cheap PU can hydrolyse and crack | Best balance | Good, but price premium |
| Cost | Lowest | Mid | Highest |
| Best for | Volume retail, price-led channels | Europe, premium DTC, eco-positioned ranges | Middle East, executive and hospitality projects |
Note: ordinary PU will hydrolyse in sustained heat and humidity. In Gulf ports, coastal South America and parts of West Africa, a standard PU chair can develop surface cracking within two to three years.
Where each market usually lands
Middle East
genuine leather in Walnut + Black or White + Beige; the wood-grain and light-colour combinations suit hotel suites and executive floors
01
Europe
microfiber in Walnut + Black or White + Wood; vegan positioning, REACH documentation, mid-to-high price points
02
South America
PU in White + Black or White + Orange; price-led, but insist on hydrolysis-resistant grade for coastal cities
03
Central Asia
PU and microfiber mixed in Walnut + Black; distributor stock, mid volume
04
Africa
PU in darker combinations; abrasion resistance over hand feel
05
Ships Assembled - Read This Before You Order a Container

Because it ships ready to use, the carton has to hold a chair at full height with the base attached. That means one carton per unit, and a carton volume in the region of 0.55–0.75 m³ depending on whether the base is packed separately - roughly 90–120 units per 40HQ. We will not quote a firm loading figure until the packing plan is fixed, because guessing it is how you end up paying for air.
So who should buy it this way?
- Hospitality and office fit-out projects - no installation labour on site, no missing-parts claims, furniture goes straight into the room
- DTC and e-commerce - the number one return reason for office chairs is assembly difficulty; removing it removes the return
- Premium retail and showrooms - the chair is saleable the moment it is uncrated
And who should not:
Volume wholesalers paying by the cubic metre - at this carton size the freight per unit dominates the landed cost. If that is your model, ask us about a semi-knocked-down packing variant before you commit; the chair is the same, the carton is not.
Dimensions and Access Planning
| Item | mm | inch |
|---|---|---|
| Overall height | 1120 – 1200 | 44.09 – 47.24 |
| Backrest height | 740 | 29.13 |
| Backrest width | 470 | 18.5 |
| Seat width | 560 | 22.05 |
| Seat depth | 500 | 19.69 |
| Seat height | 450 – 528 | 17.72 – 20.78 |
| Overall depth | 570 – 650 | 22.44 – 25.59 |
| Base diameter | 730 | 28.74 |
| Height adjustment stroke | 80 | 3.15 |
| Net weight | 18.1 kg | 40 lb |
Applications
Executive offices and boardrooms - the walnut shell reads as furniture rather than equipment, which is usually the point in a room where clients sit.
Hotel suites and serviced apartments - no assembly means housekeeping can replace a chair between check-outs without calling maintenance.
Home offices - 135° recline and the fixed arm height suit a chair used for both desk work and reading.
Reception and waiting areas - the mid-back version at a lower seat height works as a lounge chair without looking like a task chair.
Co-working and serviced offices - consistent specification across floors, delivered ready to place.

Quality, Testing and Compliance

EN 1335 - the European office work chair standard covering dimensions, safety and test methods. Reports available with the shipment.
Packaging drop test - cartons are drop-tested to the protocol agreed for your order, which matters more than usual here because a fully assembled chair has more exposed geometry than a flat-pack.
Material documentation - upholstery and foam declarations provided for REACH and destination-market requirements.
Batch traceability - production batch recorded against the order; a claim on a specific container can be traced to its run.
OEM / ODM and Customisation
Shell finish - walnut as standard; other veneers and solid-tone finishes on request
Upholstery - PU, microfiber, genuine leather; colour matched to your swatch or to a Pantone reference
Stitching - contrast or tonal; single or double row
Branding - embossed or debossed logo on the back panel, woven label, headrest tag
Configuration - high-back on the same tooling, so a mixed order needs no separate minimum
Packaging - printed carton, private label, multilingual assembly-free care card, barcode and carton marking to your format
Sampling - pre-production sample before the bulk run; free design catalogue on request
The standard colourways are White + Wood, White + Black, White + Beige, White + Orange and Walnut + Black. Custom colours are quoted against your reference - send a photo or a physical swatch, not a colour name.

Packaging and Logistics

Packing: one unit per carton, fully assembled, foam-blocked at the base and shell edges.
Loading: confirmed against the final packing plan; indicative 90–120 units per 40HQ. Semi-knocked-down variant available on request for volume buyers.
MOQ: sample units available; bulk MOQ confirmed by configuration and colour mix.
Lead time: standard configurations quoted at order stage; peak season and custom colours add time.
Terms: FOB Ningbo; CIF and DDP quoted on request.
FAQ
Q1. Is this Modern Leather Executive Chair genuinely no-assembly?
A: Yes. It arrives finished - base, cylinder, seat and back already together. The customer uncrates it and sits down. That is also why the carton is larger than a flat-pack chair's, and why the loading figure per container is lower. If your channel is volume-led rather than project-led, ask about the semi-knocked-down variant before you commit to a quantity.
Q2. Is the shell solid walnut?
A: No. It is a heat-pressed bentwood core with a walnut veneer face - the correct construction for a curved shell at this thickness. Solid timber bent to this radius would crack or spring back. The grain and colour are walnut; the substrate is engineered.
Q3. What is the difference between the three leather grades in practice?
A: PU is the most uniform and the cheapest, and the most sensitive to heat and humidity. Microfiber has the softest hand feel and the best stability in hot climates. Genuine leather shows natural grain variation and takes conditioning, which is why hospitality buyers prefer it. For Gulf and coastal markets, do not specify standard PU.
Q4. Can the armrests be adjusted?
A: No. The arms are formed by the shell itself, so height is fixed by the geometry. This is the trade-off for the continuous silhouette and the absence of arm brackets.
Q5. What is the load rating?
A: The chair is tested to EN 1335 requirements and the report is available with the shipment.
Q6. What is the gas lift class?
A: We supply the class your market requires and provide the test report. Tell us at enquiry stage rather than after the order is placed, because the class affects both cost and lead time.
Q7. Which casters suit which floor?
A: PU twin-wheel is the default and is right for tile, marble and polished concrete. For thick carpet we specify a different wheel.
Q8. What do you need to quote?
A: Five things: destination market and port, quantity and colour mix, leather grade, whether you need assembled or semi-knocked-down packing, and any certification your tender requires. With those we quote a specific configuration instead of a range.
Hot Tags: modern leather executive chair, China modern leather executive chair manufacturers, suppliers, modern office chair for professional environments

















